• Register
0 votes
Checking Login and Password... OK
Balance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 10
PDA version: A217FXXU4BTK6
CSC version: A217FOXM4BTK6
Phone version: A217FXXU4BTK6
Product code: SM-A217FZKNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC086JWL
IMEI: 351832198293566
HW version: MP 0.500
RF cal date: 20201202
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2020-11-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM65 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK):  39406208
Network code (NCK): 39406208
Done with Samsung Tool PRO v.43.27 [SM-A217F,Read Codes via Server [UPLOAD 2021]]

CHECK PLEASE MCK WORK BUT WHEN TAPE NCK CODE ERROE
in Samsung Tool by (320 points)

5 Answers

0 votes
Hello. Reset phone settings. Insert sim, enter mck and calculate nck code.
by (134k points)
0 votes
BUT HE TAKE 10 CREDIT MCK AND NCK

IF I CALCULATE NEW NCK CODE HE TAKE 5 CREDIT
by (320 points)

You have 10 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue?  Yes
Waiting ADB device... OK

0 votes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 10
PDA version: A217FXXU4BTK6
CSC version: A217FOXM4BTK6
Phone version: A217FXXU4BTK6
Product code: SM-A217FZKNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC086JWL
IMEI: 351832198293566
HW version: MP 0.500
RF cal date: 20201202
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2020-11-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM65 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... error
Done with Samsung Tool PRO v.43.27 [SM-A217F,Read Codes via Server [UPLOAD 2021]]
by (320 points)
Repeat operation again.
0 votes
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-A217F
Software version: 43.27

Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 10
PDA version: A217FXXU4BTK6
CSC version: A217FOXM4BTK6
Phone version: A217FXXU4BTK6
Product code: SM-A217FZKNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC086JWL
IMEI: 351832198293566
HW version: MP 0.500
RF cal date: 20201202
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2020-11-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM65 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... error (1)
Could not find data. Please try again.
Done with Samsung Tool PRO v.43.27 [SM-A217F,Read Codes via Server [UPLOAD 2021]]

I TRY SOME TIME
by (320 points)
Reflash your phone to bit5 and repeat operation.
0 votes
UNLOCK INSTRUCTIONS:
    To read security codes using sever:
    Knox warranty does not matter.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server [UPLOAD 2021]
Selected model: SM-A217F
Software version: 43.27

Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217F
Android version: 10
PDA version: A217FXXU5BUA4
CSC version: A217FOXM5BUA4
Phone version: A217FXXU5BUA2
Product code: SM-A217FZKNCAC
CSC country code: Central Asia
CSC sales code: CAC
Carrier ID: CAC
Phone SN: R58NC086JWL
IMEI: 351832198293566
HW version: MP 0.500
RF cal date: 20201202
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-01-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM63 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... error (1)
Could not find data. Please try again.
Done with Samsung Tool PRO v.43.27 [SM-A217F,Read Codes via Server [UPLOAD 2021]]

ERROR WITH BIT 5
by (320 points)
...