• Register
0 votes
my SM-G316 has been dead after flashing in z3x .it has been irresponsive its seems to be dead ..

plz help me to recover my phone**
Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found

Operation: Repair
Selected model: SM-G316HU/DS
Software version: 37.0

Select repair option(s)

Operation: Reboot to Download
Selected model: SM-G316HU/DS
Software version: 37.0

Waiting ADB device... timeout
Phone not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Unpacking file... oK
File analysis... OK
Total file size: 0x384C5FE0 (900 Mb)
Searching USB Flash interface... COM4 detected
Setup connection... OK
Reading PIT from phone... OK
Sending spl.img... OK
Sending sboot.bin... OK
Sending sboot2.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending SPRDCP.img... OK
Sending SPRDDSP.img... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:02:17)

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching phone and switching to flash mode... not found

Operation: Repair
Selected model: SM-G316HU/DS
Software version: 37.0

Select repair option(s)

Operation: Repair
Selected model: SM-G316HU/DS
Software version: 37.0

Select repair option(s)

Operation: Read EFS
Selected model: SM-G316HU/DS
Software version: 37.0

ADB device not selected

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching phone and switching to flash mode... not found

Operation: Reboot to Recovery
Selected model: SM-G316HU/DS
Software version: 37.0

ADB device not selected

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching phone and switching to flash mode... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

File analysis... OK
Total file size: 0x384C5FE0 (900 Mb)
Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

File analysis... OK
Total file size: 0x384C5FE0 (900 Mb)
Searching USB Flash interface... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching phone and switching to flash mode... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching phone and switching to flash mode... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching phone and switching to flash mode... not found

Operation: Flash
Selected model: SM-G316HU/DS
Software version: 37.0

Searching USB Flash interface... not found
in Samsung Tool by (320 points)
retagged by

1 Answer

0 votes
Try to flash the phone with Odin and post results here.
by (102k points)
the phone cannot be taken  to the download mode
Show the sticker on the back of the phone and tell  what firmware you have flashed.
G316HUDDU0ANL1_G316HUODD0ANL3_G316HUDDU0ANL1_HOME.tar.md5

THISIS THE FIRMWARE wich i've flashed the phone i downloadded it from the z3x shell
And stiker on the back of the phone?

HHH

plz help soon my client is awaiting
Your problem is not simple to understand without seeing the phone and not knowing its background.

A lot depends on what problems were with the phone before the firmware was flashed.

If the phone was hanging or working slowly, there may be a hardware problem (oxidation after the water, mechanically bent phone, or eMMC almost dead) after trying to fix it with a software capacitor is not completely flashed. If Odin does not restore, it may be a dead flash drive (eMMC). It's not z3x, it's a phone.

Sometimes in such cases, if the problem is in the software, it can be solved by JTAG. But if the problem with hardware, it is little chance that JTAG will help.

Well, it's unlikely, but it's possible that the moment the phone is flashed, the battery is dead and needs to be recharged.
i have also the same scenario my SM-G316 has been dead after flashing in odin .  there is no dislplay after flashing its seems to be dead ..
kindly help me to recover it
bro ginhaan let me know about your phone has it recovered or not? because i am facing the same issue right now ??
...