Login
Register
Questions
Unanswered
Tags
Categories
Ask a Question
Z3X
WiKi
Check Your Phone
lg LM-X520 як прошити прошивку через EasyJTAG Plus
0
votes
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D4203FEF96A3F66D3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: FEF96A3F , rev. 0x03
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2019
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 30 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x50 , Boot from: ROM3 (Boot partition 2)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_FEF96A3F_20201216_234602.extcsd
EMMC Init completed.
Opening file: X520EMW20b_00_0926.kdz
Filename: X520EMW20b_00_0926.kdz
Model: LM-X520
Software: X52020b
BuildTime: 2020-09-05 06:43:55
Total Files: 117
Critical error: Data error.
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D4203FEF96A3F66D3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: FEF96A3F , rev. 0x03
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2019
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 30 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x50 , Boot from: ROM3 (Boot partition 2)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_FEF96A3F_20201216_234841.extcsd
EMMC Init completed.
Opening file: X520EMW10n_00_OPEN_EU_DS_OP_0709.kdz
Filename: X520EMW10n_00_OPEN_EU_DS_OP_0709.kdz
Model: LM-X52
Software: X52011p
BuildTime: 2020-07-04 02:33:28
Total Files: 116
Critical error: Data error.
No updates
lm-x520
asked
Dec 17, 2020
in
Easy JTAG
by
Ruslan1987
(
120
points)
Please
log in
or
register
to answer this question.
0
Answers
...