Lost 5 Credits With Read Codes g930a ( incorrect code)

Question

Lost 5 Credits With Read Codes g930a ( incorrect code)

User: zsc_vewnwxJp

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type #0# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes via Server
Selected model: SM-G930A
Selected port: COM51 SAMSUNG Mobile USB Serial Port
Software version: 37.0

Checking Login and Password... OK
Ballance: 58 crd.
You have 58 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G930A
Android version: 8.0.0
PDA version: G930AUCUACSF1
CSC version: G930AATTACSF1
Phone version: G930AUCUACSF1
Product code: SM-G930AZDAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38H30N4EJX
IMEI: 355502072177658
HW version: REV0.6
RF cal date: 2016.03.21
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM25 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 83902957
NET lock: 81827141
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.37.0

asked Aug 23, 2019 in Samsung Tool by Leo Villela (190 points)
edited Aug 24, 2019 by Leo Villela

Lost 5 Credits With Read Codes g930a ( incorrect code)

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.