• Register
+1 vote
Is G930T bit10 SA unlock not supported am getting Waiting for server answer... error (1)
UNLOCK INSTRUCTIONS:
To unlock:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

To reset Pattern lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset Pattern Lock' button.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-G930T
Software version: 37.0

Checking Login and Password... OK
Ballance: 11 crd.
You have 11 credit(s) left. This operation takes 8 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G930T
Android version: 8.0.0
PDA version: G930TUVSACSG1
CSC version: G930TTMBACSG1
Phone version: G930TUVSACSG1
Product code: SM-G930TZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28J40ZT15D
IMEI: 359755076585542
HW version: REV0.6
RF cal date: 2017.04.11
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2019-07-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM31 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)

Done with Samsung Tool PRO v.37.0
in Samsung Tool by (190 points)

2 Answers

0 votes
Same error help whit  this error Team z3x
by
0 votes
I have the same situation

 Checking Login and Password... OK
 Ballance: 36 crd.
 You have 36 credit(s) left. This operation takes 8 credits.Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G930T
 Android version: 8.0.0
 PDA version: G930TUVSACSG1
 CSC version: G930TTMBACSG1
 Phone version: G930TUVSACSG1
 Product code: SM-G930TZKATMB
 CSC country code: USA
 CSC sales code: TMB
 Phone SN: R28
 IMEI: 359
 HW version: REV0.6
 RF cal date: 2017.12.26
 Chip name: MSM8996
 Modem board: MSM8996
 Security patch: 2019-07-01
 Boot Warranty bit: 0
 SIM State: ABSENT
 Waiting for device to become ready... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Rebooting to upload... OK
 Searching Ramdump interface... COM438 detected
 Reading data from phone... OK
 Calculating... OK
 Searching server... OK
 Waiting for server answer... error (1)
by (160 points)
I later found out that it's not supported so use a different tool

Yo lo solucione flasheando solo modem de combinacion bit 10, despues liberan con creditos y por ultimo flashean de nuevo rom completa y lissto celular liberado...

Asi quedo

Amigo y donde conseguistes la COMBI SA

surprise

Tengo problemas porque cuando le pongo solo el modem no enciende el tel, solo se reinicia y tengo que volver a poner el software completo otra vez
...