Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... Login attached to different card!
Checking Login and Password... Login attached to different card!
Checking Login and Password... Login attached to different card!
Checking Login and Password... Login attached to different card!
Checking Login and Password... Login attached to different card!
Checking Login and Password... canceled
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... Login attached to different card!
Checking Login and Password... Login attached to different card!
Checking Login and Password... Login attached to different card!
Checking Login and Password... canceled
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... timeout
Phone not found
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU1ATLD
CSC version: G996BOWO1ATLD
Phone version: G996BXXU1ATLD
Product code: SM-G996BZKMCDR
CSC country code: Dominican Republic
CSC sales code: CDR
Carrier ID: CDR
Phone SN: RFCR10VEDVK
IMEI: 352817340770404
HW version: REV0.5
RF cal date: 20210120
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM17 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 85194061
To calculate the NCK(Network) code, please insert the SIM card, enter the MCK(Freeze) code, remove the card and try again.
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... OK
Balance: 22 crd.
You have 22 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU1ATLD
CSC version: G996BOWO1ATLD
Phone version: G996BXXU1ATLD
Product code: SM-G996BZKMCDR
CSC country code: Dominican Republic
CSC sales code: CDR
Carrier ID: CDR
Phone SN: RFCR10VEDVK
IMEI: 352817340770404
HW version: REV0.5
RF cal date: 20210120
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM17 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 85194061
To calculate the NCK(Network) code, please insert the SIM card, enter the MCK(Freeze) code, remove the card and try again.
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... OK
Balance: 14 crd.
You have 14 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU1ATLD
CSC version: G996BOWO1ATLD
Phone version: G996BXXU1ATLD
Product code: SM-G996BZKMCDR
CSC country code: Dominican Republic
CSC sales code: CDR
Carrier ID: CDR
Phone SN: RFCR10VEDVK
IMEI: 352817340770404
HW version: REV0.5
RF cal date: 20210120
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... error
SIM card detected, remove it
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... OK
Balance: 14 crd.
You have 14 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU1ATLD
CSC version: G996BOWO1ATLD
Phone version: G996BXXU1ATLD
Product code: SM-G996BZKMCDR
CSC country code: Dominican Republic
CSC sales code: CDR
Carrier ID: CDR
Phone SN: RFCR10VEDVK
IMEI: 352817340770404
HW version: REV0.5
RF cal date: 20210120
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM17 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? No
To calculate the NCK(Network) code, please insert the SIM card, enter the MCK(Freeze) code, remove the card and try again.
If you don't have the MCK(Freeze) code, then read it first.
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.9
Checking Login and Password... OK
Balance: 14 crd.
You have 14 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU1ATLD
CSC version: G996BOWO1ATLD
Phone version: G996BXXU1ATLD
Product code: SM-G996BZKMCDR
CSC country code: Dominican Republic
CSC sales code: CDR
Carrier ID: CDR
Phone SN: RFCR10VEDVK
IMEI: 352817340770404
HW version: REV0.5
RF cal date: 20210120
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM17 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 85194061
To calculate the NCK(Network) code, please insert the SIM card, enter the MCK(Freeze) code, remove the card and try again.
