Login
Register
Questions
Unanswered
Tags
Categories
Ask a Question
Z3X
WiKi
Check Your Phone
creditos cobrados 2 veces
0
votes
trate de liberar un a21s g996b bit 3 pero solo genero el codigo MCK y me cobro 2 veces por favor
Operation: Flash
Selected model: SM-G996B
Software version: 43.15
File analysis... OK
Total file size: 0x2B37B24C0 (11063 Mb)
Searching USB Flash interface... COM12 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending up_param.bin.lz4... OK
Sending ldfw.img.lz4... OK
Sending tzsw.img.lz4... OK
Sending keystorage.bin.lz4... OK
Sending dpm.img.lz4... OK
Sending uh.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending harx.bin.lz4... OK
Sending tzar.img.lz4... OK
Sending vddcal_fw.bin.lz4... OK
Sending ssp.img.lz4... OK
Sending boot.img.lz4... OK
Sending vendor_boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending super.img.lz4... OK
Sending userdata.img.lz4... OK
Sending misc.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending vbmeta_system.img.lz4... OK
Sending metadata.img.lz4... OK
Sending modem.bin.lz4... OK
Sending modem_debug.bin.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Sending prism.img.lz4... OK
Sending optics.img.lz4... OK
Flashing done (time - 00:09:31)
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.15
Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU3AUDA
CSC version: G996BOXM3AUDA
Phone version: G996BXXU3AUDA
Product code: SM-G996BZKLGTO
CSC country code: GUATEMALA
CSC sales code: GTO
Carrier ID: CGU
Phone SN: RFCR7044SDZ
IMEI: 352454781566784
HW version: REV0.5
RF cal date: 20210705
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: LOADED,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... error
SIM card detected, remove it
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.15
Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU3AUDA
CSC version: G996BOXM3AUDA
Phone version: G996BXXU3AUDA
Product code: SM-G996BZKLGTO
CSC country code: GUATEMALA
CSC sales code: GTO
Carrier ID: CGU
Phone SN: RFCR7044SDZ
IMEI: 352454781566784
HW version: REV0.5
RF cal date: 20210705
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM112 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? Yes
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 18268263
To calculate NCK(Network) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.
Operation: Read Codes via Server
Selected model: SM-G996B
Software version: 43.15
Checking Login and Password... OK
Balance: 17 crd.
You have 17 credit(s) left. This operation takes 8 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G996B
Android version: 11
PDA version: G996BXXU3AUDA
CSC version: G996BOXM3AUDA
Phone version: G996BXXU3AUDA
Product code: SM-G996BZKLGTO
CSC country code: GUATEMALA
CSC sales code: GTO
Carrier ID: CGU
Phone SN: RFCR7044SDZ
IMEI: 352454781566784
HW version: REV0.5
RF cal date: 20210705
Chip name: EXYNOS2100
Modem board: SHANNON5123AP
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM112 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Now only the MCK(Freeze) code will be calculated. Continue? No
To calculate NCK(Network) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.
If you don't have the MCK(Freeze) code, then read it first.
g996b
asked
Sep 30, 2021
in
Samsung Tool
by
wichoedu
(
180
points)
Please
log in
or
register
to answer this question.
1
Answer
0
votes
Hello. 8 credits refunded. Please carefully complete steps in log for NCK calculation.
answered
Oct 1, 2021
by
Dimidrolus
(
199k
points)
Please
log in
or
register
to add a comment.
...
