Can you please refund me credit for unlocking an unsupported device.

0 votes

zsc_pjCiHDrg

 

That's my username to refund the credit.

 

My device is sm-A037u on the latest security patch and locked to Verizon. After unlock it still asked for code so I tried twice. I lost 10 credit in total.

 

in General questions by (120 points)

1 Answer

0 votes
Hello. Provide full text log here.
by (200k points)
I'm so stressed out, could you check the model and my account by the username that I provided? The device is A037u bit 3 there's no tool available for it only but 2 works
by (120 points)
here is the full log please refund me the credits .

 

Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 4.9

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits. Continue?  Yes
Searching Samsung modem... detected COM5
Reading phone info... OK
Model: SM-A037U
AP version: A037USQU3BVK1
CSC version: A037UOYN3BVK1
CP version: A037USQU3BVK1
OS version: 12
Product code: VZW
Carrier ID: XAA
Phone SN: R9WTC09L9WF
Unique number: W154758300E0460700B9
IMEI: 352612262147636
IMEI Certi: PASS
Powering off... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM21 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM24 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x252D1B79, 0xBCE44A1A, 0xC76D4230, 0x9F934383
Get Chip ID... [MT6765]
Get SOC ID... [FA83E7B2C627502278C49B5ADEA511CBCD08CEBF133FE971F4CCF9968D168526]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010047583642414200E0460700B913
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: GX6BAB
   EMMC_ID   : 0x15010047583642414200E0460700B913
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A037U
Product Name         : a03susq
Product Device       : a03su
Product Board        : a03su
Board Platform       : connac1x
Build ID             : SP1A.210812.016
Build Date           : Wed Nov  2 00:33:23 KST 2022
Display ID           : SP1A.210812.016.A037USQU3BVK1
Security Patch       : 2022-10-01
Version SDK          : 31
Version Release      : 12
Version Codename     : REL
Firmware Version     : A037USQU3BVK1
Read security partition from phone... OK
Read security files... OK
Read lock info... OK
Searching server... OK
Waiting for server answer... OK
Unlocking ... [1] ... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 4.9

Checking Login and Password... OK
Balance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
Searching Samsung modem...
Operation aborted

Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 4.9

Checking Login and Password... OK
Balance: 10 crd.
You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
Searching Samsung modem... detected COM5
Reading phone info... OK
Model: SM-A037U
AP version: A037USQU3BVK1
CSC version: A037UOYN3BVK1
CP version: A037USQU3BVK1
OS version: 12
Product code: VZW
Carrier ID: XAA
Phone SN: R9WTC09L9WF
Unique number: W154758300E0460700B9
IMEI: 352612262147636
IMEI Certi: PASS
Powering off... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM21 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM24 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x252D1B79, 0xBCE44A1A, 0xC76D4230, 0x9F934383
Get Chip ID... [MT6765]
Get SOC ID... [FA83E7B2C627502278C49B5ADEA511CBCD08CEBF133FE971F4CCF9968D168526]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010047583642414200E0460700B913
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: GX6BAB
   EMMC_ID   : 0x15010047583642414200E0460700B913
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A037U
Product Name         : a03susq
Product Device       : a03su
Product Board        : a03su
Board Platform       : connac1x
Build ID             : SP1A.210812.016
Build Date           : Wed Nov  2 00:33:23 KST 2022
Display ID           : SP1A.210812.016.A037USQU3BVK1
Security Patch       : 2022-10-01
Version SDK          : 31
Version Release      : 12
Version Codename     : REL
Firmware Version     : A037USQU3BVK1
Read security partition from phone... OK
Read security files... OK
Read lock info... OK
Searching server... OK
Waiting for server answer... OK
Unlocking ... [1] ... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
by (120 points)
i lost 10 credit and device still locked
by (120 points)
Refunded.
by (200k points)

Copyright © 2024 z3x-team Q&A - All rights reserved.

Powered by Question2Answer

Theme Designed By: Q2A Market

...