Credit refund

0 votes
My credit was taken twice for the same phone and the phone still isnt unlock Samsung SM-960U IMEI 358192100670887 i need it refunded. Thanks
in Samsung Tool by (120 points)

1 Answer

0 votes
Hello. Provide logs.
by (200k points) 1 flag 
Checking Login and Password... OK
 Balance: 5 crd.
 You have 5 credit(s) left. This operation takes 5 credits. Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G960U
 Android version: 10
 PDA version: G960USQS9FUG2
 CSC version: G960UOYN9FUG2
 Phone version: G960USQS9FUG2
 Product code: SM-G960UZKABST
 CSC country code: USA
 CSC sales code: BST
 Carrier ID: BST
 Phone SN: R58MA2DYECN
 IMEI: 358192100670887
 HW version: REV1.1
 RF cal date: 2019.10.10
 Chip name: SDM845
 Modem board: SDM845
 Security patch: 2021-08-01
 Boot Warranty bit: 0
 SIM State: CARD_IO_ERROR
 Waiting for device to become ready... OK
 Reading IMEI... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Initialization... OK
 Checking network lock status... LOCKED
 Reading data from phone... OK
 Searching server... OK
 Waiting for server answer...
 Operation aborted
 
 Operation: Unlock
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 0 crd.
 Not enough credits
 Operation: Unlock SPR via Server
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 0 crd.
 Not enough credits
 Operation: Unlock
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 10 crd.
 You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G960U
 Android version: 10
 PDA version: G960USQS9FUG2
 CSC version: G960UOYN9FUG2
 Phone version: G960USQS9FUG2
 Product code: SM-G960UZKABST
 CSC country code: USA
 CSC sales code: BST
 Carrier ID: BST
 Phone SN: R58MA2DYECN
 IMEI: 358192100670887
 HW version: REV1.1
 RF cal date: 2019.10.10
 Chip name: SDM845
 Modem board: SDM845
 Security patch: 2021-08-01
 Boot Warranty bit: 0
 SIM State: CARD_IO_ERROR
 Waiting for device to become ready... OK
 Reading IMEI... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Initialization... OK
 Checking network lock status... LOCKED
 Reading data from phone... OK
 Searching server... OK
 Waiting for server answer... error (1)
 Server error: srverr 0
 
 Operation: Unlock
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 10 crd.
 You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G960U
 Android version: 10
 PDA version: G960USQS9FUG2
 CSC version: G960UOYN9FUG2
 Phone version: G960USQS9FUG2
 Product code: SM-G960UZKABST
 CSC country code: USA
 CSC sales code: BST
 Carrier ID: BST
 Phone SN: R58MA2DYECN
 IMEI: 358192100670887
 HW version: REV1.1
 RF cal date: 2019.10.10
 Chip name: SDM845
 Modem board: SDM845
 Security patch: 2021-08-01
 Boot Warranty bit: 0
 SIM State: CARD_IO_ERROR
 Waiting for device to become ready... OK
 Reading IMEI... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Initialization... error (0.)
 
 Operation: Unlock
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 10 crd.
 You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
 Waiting ADB device... timeout
 Phone not found
 
 Operation: Unlock SPR via Server
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 10 crd.
 You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
 Waiting ADB device... timeout
 Phone not found
 
 Operation: Unlock
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 10 crd.
 You have 10 credit(s) left. This operation takes 5 credits. Continue?  Yes
 Waiting ADB device... OK
 Reading phone info...
 Model: SM-G960U
 Android version: 10
 PDA version: G960USQS9FUG2
 CSC version: G960UOYN9FUG2
 Phone version: G960USQS9FUG2
 Product code: SM-G960UZKABST
 CSC country code: USA
 CSC sales code: BST
 Carrier ID: BST
 Phone SN: R58MA2DYECN
 IMEI: 358192100670887
 HW version: REV1.1
 RF cal date: 2019.10.10
 Chip name: SDM845
 Modem board: SDM845
 Security patch: 2021-08-01
 Boot Warranty bit: 0
 SIM State: CARD_IO_ERROR
 Waiting for device to become ready... OK
 Reading IMEI... OK
 Initialization zTool... OK
 Running zTool, please wait... OK
 Initialization... OK
 Checking network lock status... LOCKED
 Reading data from phone... OK
 Searching server... OK
 Waiting for server answer... error (1)
 Server error: Server answer timeout
 
 Operation: Unlock
 Selected model: SM-G960U
 Software version: 45.14
 
 Checking Login and Password... OK
 Balance: 5 crd.
 You have 5 credit(s) left. This operation takes 5 credits. Continue?  No
by (120 points)
Hello. Refunded. Repeat operation.
by (200k points)
Dear Team Representative I Have Issue Face MY Samsung TOOL Pro
After Long Time When I Used It Says Programmed Damaged I Clean The Card And Remove Card From Box And Connect The Card In Universal Smart Reader In Z3x Shell Card Info Show
But WHen I Run The Programm The Its Says Programmed DAMAGED
I Visit The Gsmhosting i checked this issue its says change the smart card and contact the team to transfer your old activation to new card
bro in my case i have z3x lg card available is its possible to treansfer my samsung activation old card to transfer my z3x lg card
MY OLD Samsung Z3X Smart Card SN:AA5B4A8F
MY Z3x LG SMART Card SN:000307E1
Please Transfer MY Samsung Activation To My This One Samsung LG Smart Card
Thanks
Team
by (120 points)

Hello. 

 

Try these steps:

  1. Disconnect card
  2. Run shell, Hardware wizard, Repair Dead Card should be available (because no card connected)
  3. Connect card and then click Next (with Repair option selected)
  4. Update card firmware and activate all products and close Wizard
  5. Launch Samsung Tool
by (200k points)
Z3x Team I Follow All Steps But Still Not Working
Remove Card Clean Card And YOU Said Steps All Done But Still Card Damaged You Give Me These Setups THis Steps I Follow These Link
Check Link
https://forum.gsmhosting.com/vbb/f453/z3x-box-card-error-damage-solved-3087317/
But My Not Done Still Damaged
I Checked More Your POSTING THEN I WILL CONTACT YOU
https://forum.gsmhosting.com/vbb/f453/z3x-smart-card-dead-any-way-replace-solved-2937309/
by (120 points)
PLZ Check And Resolve This Problem I HAVE Both Smart Card In My Hand
by (120 points)
Repair dead card operation finished successfully? Provide screenshot.
by (200k points)

Shell Card Info Logs Attached 
IST CARD SN LG ACTIVATION
LAST CARD SN SAMSUNG ACTIVATION PROGRAMMED DAMAGED 
Team Check And Resolve
MY OLD Samsung Z3X Smart Card SN:AA5B4A8F
MY Z3x LG SMART Card SN:000307E1

by (120 points)

Repair Card Finished Log Because When I PLUG OK CRD ITS DETECTED IN THIS STATE WHEN FAULTED CARD CONNECTED ITS NOT PROPER WORK
I AGAIN SEND THE LOGS CHECK
Faulty I DISCONNECT AND CLICK HARDWARE REPAIR CARD OPTION APPEAR NOW CLICK NEXT BUT STILL NO SHOW SMART CARD AT THE TIME

by (120 points)

This Card Show Detect But Other Card Not Detected



by (120 points)
Please add more details, to prove that the activations belongs to you:

- Reason for transfer
- Old and new card serial numbers in text format.
- screenshots with card info and smart-card activations which must be moved (if old card dead provide only new card screenshot)
- Smart cards photos from both sides
- date of successful work done of smart-card using credits (sever connect)
if you don't have a credit account, date of last action downloading (firmware, program updates)
- Photos of Z3X box/dongle, Easy JTAG box, pandora box
- your IP address
by (200k points)

OLD SMART CARD SERIAL AA5B4A8F
New Smart Card Serial 000307E1
New Smart Card Screen Shot 

No Server Base CREDIT Function Used 
IP Address 39.41.40.2

by (120 points)

Info Attached 
OLD SMART CARD DETECT LAST ADDED CARD INFO SHOW IN Z3X SHELL
I WILL ATTACHED IT

Last SN IS SAMSUNG DAMAGED PROGRAMMED ERROR SERIAL NUMBER OLD SMART CARD SERIAL AA5B4A8F

by (120 points)
Plug only reader without card - press hardware wizard - press repair - insert card - continue repair.
by (200k points)
i Am Doing This Setup But Still No Response From This Card No Smart Card Found Card Not Detected Readed Detected
by (120 points)
Hardware Wizard But Still Not DOing Yer
by (120 points)
Ok, provide all info for transfer as in list.
by (200k points)

OLD SAMSUNG DAMAGED SMART SERIAL NUMBER SN:AA5B4A8F
MY Z3x LG SMART Card SN:000307E1
MY IP ADDRESS:39.41.11.239
NO Previous Function Yet Perform Any Credit Based Any Card
Last Working Smart Card INFO ATTACHED


Card Info Z3X SHELL WORKING CARD



ALL INFO ATTACHED 
 

by (120 points)
Hello Z3x Team Representative
Dimidrolus
How Many Time Spend More To Transfer
by (120 points)
Dear Team Representative I Am Waiting Your Response Feel Free To Message Us
by (120 points)
- Old smart card photos both sides

- Latest server operations with old card  (download software, firmwares, server unlocks)
by (200k points)

OLD SMART CARD Pictures Attached
i will clean smart card and attached the picture
Both Pictures Attached Plz Update IT As Soon As Possible

 

by (120 points)
Bro Not Use Any Latest Function Perform Against This Damaged Samsung Smart Card Only Detection Log Shell
WE ALREADY SEND LOG INFO Z3X SHELLSMAT CARD INFO
Kindly Solve This Issue As Soon As Possible
by (120 points)
Waiting
by (120 points)
So this photo from dead card and sn AA5B4A8F?
by (200k points)
Yes
by (120 points)
i Am Recheck and inform you again
by (120 points)
This card picture doesnt accoring to card sn.
by (200k points)
Bro Wait Sorry I Send The LG Activated Card Picture Wait I will send the samsung programmed damaged card
by (120 points)

Z3x Programmed Damaged Smart Card Picture0
Checked And InformUs

by (120 points)
Send The Card Info Front BACK Picture Checked And Inform Us
by (120 points)
Team I am waiting your response
kindly inform us about this case
by (120 points)
Hello Team Representative What About My Case
by (120 points)
According to provided info - your request rejected.
by (200k points)
i will provide all info whats the mistake my providing information plz tell us team
by (120 points)

Copyright © 2024 z3x-team Q&A - All rights reserved.

Powered by Question2Answer

Theme Designed By: Q2A Market

...