intente liberar un samsung a205g por codigo y me dio el mismo codigo dos veces y ese no era el correcto para liberarlo, el equipo ya lo entregue al cliente y me quede sin 10 creditos
Operation: Read Codes via Server
Selected model: SM-A205G
Software version: 45.14
Checking Login and Password... OK
Balance: 29 crd.
You have 29 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A205G
Android version: 11
PDA version: A205GUBSACVB1
CSC version: A205GOWMACVB1
Phone version: A205GNDXSACVB1
Product code: SM-A205GZKLCGU
CSC country code: Guatemala
CSC sales code: CGU
Carrier ID: CGU
Phone SN: R58M54Z2QCP
IMEI: 357526102257949
HW version: REV0.3
RF cal date: 20190520
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2022-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Checking SIM status... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... OK
Reading lock state... OK
Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate? MCK(Freeze, PUK)
Executing... OK
Searching Ramdump interface... COM6 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK, PUK): 40817314
To calculate NCK(Network, PIN, REGIONAL) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze, PUK) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.
Done with Samsung Tool PRO v.45.14 [SM-A205G,Read Codes via Server]
UNLOCK INSTRUCTIONS:
To read security codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Read codes ...' algo,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-A205G
Software version: 45.14
Checking Login and Password... OK
Balance: 24 crd.
You have 24 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A205G
Android version: 11
PDA version: A205GUBSACVB1
CSC version: A205GOWMACVB1
Phone version: A205GNDXSACVB1
Product code: SM-A205GZKLCGU
CSC country code: Guatemala
CSC sales code: CGU
Carrier ID: CGU
Phone SN: R58M54Z2QCP
IMEI: 357526102257949
HW version: REV0.3
RF cal date: 20190520
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2022-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Checking SIM status... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... OK
Reading lock state... OK
Your phone is requesting a MCK(Freeze, PUK) code. What code do you want to calculate? MCK(Freeze, PUK)
Executing... OK
Searching Ramdump interface... COM6 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK, PUK): 40817314
To calculate NCK(Network, PIN, REGIONAL) code perfom the following operations:
1. Insert the SIM card.
2. Enter the MCK(Freeze, PUK) code.
3. Remove the SIM card.
4. Reboot phone.
5. Try again.
Done with Samsung Tool PRO v.45.14 [SM-A205G,Read Codes via Server]
