redmi note11R unlock Bootloader

0 votes
请问一下，为什么没有 红米 note11R unlock Bootloader？非常急需，希望有对应的lk_a文件发个邮箱给我哈，谢谢！
in General questions by (130 points)

1 Answer

+1 vote
Hello. Are you pandora software user?
by (200k points)

是的，我昨天刚开通，就想解锁note11R BL，但是没找到此功能！

by (130 points)
You cant find it, because its not supported.
by (200k points)

这是吗？

by (130 points)
请问一下，会更新吗？
by (130 points)
Sure, we always release some hot updates.
by (200k points)
好的，希望能尽快收到note11R的更新！谢谢。
by (130 points)

请问一下近期会更新note 11R 的新版本解锁 BL吗？我看到好像有其它工具已经开始更新了！

by (130 points)
Provide examples.
by (200k points)

这个工具支持老版本，但新版本的解锁后老是循环重启，查了相关论坛，有些说是新版本是B卡插导致，但我查信息显示是A卡槽，麻烦您看一下！谢谢！

by (130 points)
And is it unlocked?)
by (200k points)
显示解锁，但是循环重启！
by (130 points)

还需要我提供一些解锁和解锁后循环重启的数据吗？

by (130 points)
Provide partitions dump (except userdata and cache).
by (200k points)

Selected model: Xiaomi Redmi Note 11R (lightcm)
Operation: Read Flash Info
Software version: 6.3
Work ID: 16048987

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x6011DD7D, 0xF735B06C, 0x495B3EE1, 0x8F3B4CAA
Get Chip ID... [MT6833]
Get SOC ID... [BA2E86A2EA09CE6498E82DED169DD700F6A507443C69800B54982F08DE5FCE03]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): SDINDDK4-128G    (2008)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : SDINDDK4-128G   
   UFS_FWVER : 2008
   BLOCK_SIZE: 0x0000001000 (4.00Kb)
   UFS_LU0   : 0x0000400000 (4.00Mb)
   UFS_LU1   : 0x0000400000 (4.00Mb)
   UFS_LU2   : 0x1DCD800000 (119.21Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand        : Redmi
Product Manufacturer : Xiaomi
Product Model        : 22041219G
Product Name         : light
Product Device       : light
Product Board        : light
Board Platform       : mt6833
Build ID             : SP1A.210812.016
Build Date           : Sun Mar 19 19:54:41 CST 2023
Display ID           : AN6138A-light-build-20230319194712
Security Patch       : 2023-03-01
Version SDK          : 31
Version Release      : 12
Version Codename     : REL
Firmware Version     : V13.0.19.0.SLSCNXM
Userdata FS Type     : F2FS
Read Flash Info done!

by (130 points)
请问一下lk_a.img这个有编辑工具吗？我试下来现在是可以解锁的，就是一直循环重启，感觉是引导问题，我想尝试改一下lk_a.img这个文件。因为我用原生的lk_a.img覆盖后就可以正常开机了，但同样解锁也失效了！但我一直找不到能编辑lk_a.img的工具。麻烦您有推荐吗？
by (130 points)
Its z3x support page. Only z3x software discuss here.
by (200k points)
Selected model: Xiaomi Redmi Note 11E (Light)
Operation: Read Flash Info
Software version: 6.3
Work ID: 16811236

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x6011DD7D, 0xF735B06C, 0x495B3EE1, 0x8F3B4CAA
Get Chip ID... [MT6833]
Get SOC ID... [BA2E86A2EA09CE6498E82DED169DD700F6A507443C69800B54982F08DE5FCE03]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): SDINDDK4-128G    (2008)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : SDINDDK4-128G   
   UFS_FWVER : 2008
   BLOCK_SIZE: 0x0000001000 (4.00Kb)
   UFS_LU0   : 0x0000400000 (4.00Mb)
   UFS_LU1   : 0x0000400000 (4.00Mb)
   UFS_LU2   : 0x1DCD800000 (119.21Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand        : Redmi
Product Manufacturer : Xiaomi
Product Model        : 22041219G
Product Name         : light
Product Device       : light
Product Board        : light
Board Platform       : mt6833
Build ID             : SP1A.210812.016
Build Date           : Sun Mar 19 19:54:41 CST 2023
Display ID           : AN6138A-light-build-20230319194712
Security Patch       : 2023-03-01
Version SDK          : 31
Version Release      : 12
Version Codename     : REL
Firmware Version     : V13.0.19.0.SLSCNXM
Userdata FS Type     : F2FS
Read Flash Info done!
by (130 points)
locks 里面 只有 Bootloader 上锁 ，没有解锁选项！不支持note11r，但是note11R 之前的版本都是支持 BL 解锁的！请你们可以看看更新一下！谢谢。非常着急需要用！十分感谢。
by (130 points)

老大，有没有办法解决下此问题，因为小米解锁限制了，还有十几台机器特别急需要解锁。有偿求个方案，（现已知问题：解锁后循环重启）

by (130 points)
Wait for updates.
by (200k points)
好的，谢谢！比较急，已经等待很久了，如果有方案我可以付费先买了用，真的很着急！十分感谢！
by (130 points)

Copyright © 2024 z3x-team Q&A - All rights reserved.

Powered by Question2Answer

Theme Designed By: Q2A Market

...