0 votes

Good evening!

2022-12-22 on the website https://all-spares.ua/ I purchased ICFRIEND ICS-UFS 3 in 1 BGA Set (Easyplus UFS Key K1 with crypto key), six months ago everything was working (read and wrote BGA95 and BGA153 ). Now you need to read the UFS and when connecting it gives an error: Can't open link, Code: -51, Reason: BOX: Socket not detected

Z3X EasyJtag Software ver. 3.8.0.6
Can't open link, Code: -51, Reason: BOX: Socket not detected
Виконано.

The latest firmware updates of the programmer and SIM card Z3X could affect the work Easyplus UFS Key K1?

eMMC_tool ver. 2.0.2.0 (release date: 24.01.2024)
Microsoft Windows 10 (64 bit) build 19045 (10.0.19041.3636)

Official telegram group: Z3X Easy Jtag Plus SoftWare Official

Looking for EasyJTAG box...
EasyJTAG API ver. 3800
EasyJTAG Box Serial = ****************
Card Serial = ********
EasyJTAG Box Firmware = 2,5302

Firehose loaders: 427

Changelog:
24.01.2024 (ver 2.0.2.0)

Fix: Bugs that have been found through your crash report
Fix: Minor interface changes
Fix: "UFS Settings" page improved
Fix: "eMMC Settings" page improved
Fix: RemoveFRP improved
Fix: Parser "Super partition" improved
Add: Hex Viewer/Editor
Add: A lot of firehoses
Add: Detect protocol Sahara v3 (qc9008)
Add: Huawei APP Unpacker
Add: Skip Write/Erase/Read errors
Add: Setting BlockSize for Write/Erase/Read

Operation: Connect to Z3X EasyJtagPlus

Setting Interface to EasyJtag2/UFS-Socket
Setting IO Levels to High
Setting Frequence to 66 Mhz

Can't init device. Error: -51. Reason: BOX: Socket not detected


<--------------------------------------------------------------------------->
OLD Log:
eMMC_tool ver. 2.0.1.0 (release date: 05/05/2021)
Microsoft Windows 10 (64 bit) build 19045 (10.0.19041.2788)

Search EasyJTAG...
EasyJTAG API version. 3403
EasyJTAG serial number = ****************
Card serial number = ********
EasyJTAG firmware = 2.5301

List of changes:
05/05/2021 (ver 1.6.6.0)

Add: New keys for Oppo unpack
Fix: Bugs that have been found through your crash report

05/05/2021 (ver 2.0.1.0)

Add: Vendor LG
Add: Mediatek Preloader Parser
Add: OnePlus Unpacker
Add: Xiaomi Custom EDL Authorization
Add: Xiaomi Remove Mi Account (only Qualcomm)

No updates

Operation: Connect to Z3X EasyJtagPlus

Setting Interface to EasyJtag2/UFS-Socket
Setting IO High level
Setting Frequency to 66 MHz

Socket Information:
Socket Mark: EasyJTAG UFS Socket 3 in 1 by MOORC 03.03.21
Socket Serial: ******************
Socket Type: UFS_SOCKET_3_IN_1
UFS Power Information:
Mode: High, VCC: 3221 mV, VCCQ2: 1922 mV
UFS Device Information:
UFS Manufacturer: SKHYNIX, UFS ProductName: H2MU64122MAR
UFS OemID: ****, UFS SerialNumber: 0x************
Maximum Number of LUs: 8, Number of LUs found: 3, Number of WLUs found: 1, LUs Re-configure: Disabled
RPMB Counter: 2
UFS LUN 0 Capacity: 30508 MB (000772C00000)
UFS LUN 1 (Boot A) Capacity: 4 MB (000000400000)
UFS LUN 2 (Boot B) Capacity: 4 MB (000000400000)
UFS W-LUN 0xC4 (RPMB) Capacity: 4 MB (000000400000)
in General questions by (120 points)

1 Answer

0 votes
Hello. Yes, socket should work with latest updates. Seems like something happens with socket.
by (201k points)
Thank you. I will deal with the socket .
...