• Register
0 votes

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically, 
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program. 

Operation: Reset FRP UFS
Selected model: SM-G928F
Selected port: COM221 Z3X BOX Serial Port
Software version: 33.2

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM221 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G928F)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.33.2

in Samsung Tool by (371 points)

1 Answer

0 votes
Is not a question is a succefull job
by (1.4k points)
...