read code wrong SM-G892A, bit5

Question

read code wrong SM-G892A, bit5

I trated to unlock Samsung s8 active...but z3x geve me wrong code...and i lost credit....is it erro from server???

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G892A
Selected port: COM1061 SAMSUNG Mobile USB Serial Port
Software version: 38.11

Checking Login and Password... OK
Ballance: 9 crd.
You have 9 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G892A
Android version: 7.0
PDA version: FA70_G892AUCU5ASD1
CSC version:
Phone version: G892AUCU5ASD1
Product code: SM2G892AZDAATT
CSC country code:
CSC sales code:
Phone SN: R38J80AQ50V
IMEI: 358524081184985
HW version: REV0.5
RF cal date: 2017.08.11
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-02-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM149 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 96829639
NET lock: 40416250
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.38.11

asked Dec 31, 2019 in Samsung Tool by joenmanuel (120 points)

read code wrong SM-G892A, bit5

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.