• Register
0 votes
Operation: Read Codes via Server
 Selected model: SM-A705FN
 Software version: 38.11
 
 Checking Login and Password... OK
 Ballance: 6 crd.
 You have 6 credit(s) left. This operation takes 5 credits.Continue?  Yes
 Waiting for device to become ready... OK
 Reading phone info...
 Model: SM-A705FN
 Android version: 9
 PDA version: A705FNXXU4ASK6
 CSC version: A705FNOXM4ASK6
 Phone version: A705FNXXU4ASK6
 Product code: SM-A705FZKUPHN
 CSC country code: The Netherlands
 CSC sales code: PHN
 Phone SN: R58MA7FBQKT
 IMEI: 352030119685882
 HW version: MP 0.4A0
 RF cal date: 2019.10.30
 Chip name: SM6150
 Modem board: SM6150
 Security patch: 2019-11-01
 Boot Warranty bit: 0
 SIM State: ABSENT,NETWORK_LOCKED
 Initialization zTool... OK
 Running zTool, please wait... OK
 Reading data from phone... OK
 Searching server... OK
 Waiting for server answer... OK
 Calculating... error (1)
 Reboot phone and try again.
 Check ADB drivers, USB cable. Don't use USB Hubs
 If this repeated then reflash phone and make factory reset.
in Samsung Tool by (120 points)

1 Answer

0 votes
Hello, credits refunded on your account.
by (102k points)
must be powered on.
  2. Type *#0808# and select 'DM+ACM+ADB'.
  3. Run dialer and type *#0*# (service mode will appear).
  4. Connect the phone to USB cable, choose correct COM port in port settings.
  5. Press 'Unlock' button.
  6. Paste MSL code in new opened window and press 'OK'.
  
    Unlocking TMB using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
    
    Unlocking SPR using sever:
  1. Insert not SPR card to the phone and power it on.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock...' button,  select 'Unlock SPR via Server',    
     write your login and password in window if it will appear.  
    (Login and password will be saved as default after first input and can be changed in settings.)
  
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G955U
Selected port: COM53 SAMSUNG Mobile USB Serial Port
Software version: 38.11

Checking Login and Password... unknown error
Checking Login and Password... unknown error
Checking Login and Password... unknown error
Checking Login and Password... OK
Ballance: 12 crd.
You have 12 credit(s) left. This operation takes 5 credits.Continue?  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G955U
Android version: 8.0.0
PDA version: G955USQS5CRH1
CSC version: G955UOYN5CRH1
Phone version: G955USQU5CRF1
Product code: SM-G955UZVAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R38J601Q7PH
IMEI: 357757082364575
HW version: REV1.0
RF cal date: 2017.06.02
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM50 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 31949680
NET lock: 70307048
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.38.11

code not accepted after code was readed succesfully

Thanks Meter: 0

A705FN bit 4 error calculating error

 

Hi, i do this process but finish in error
Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A705FN
Android version: 9
PDA version: A705FNXXU4ASK6
CSC version: A705FNOXM4ASK6
Phone version: A705FNXXU4ASK6
Product code: SM-A705FZBUPHE
CSC country code: SPAIN
CSC sales code: PHE
Phone SN: R58MA4FCWRE
IMEI: 352029116931257
HW version: MP 0.4A0
RF cal date: 2019.10.18
Chip name: SM6150
Modem board: SM6150
Security patch: 2019-11-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Calculating... error (1)
Reboot phone and try again.
Check ADB drivers, USB cable. Don't use USB Hubs
If this repeated then reflash phone and make factory reset.

Please refund 5 credits please....i read in official forum this error is because is not supported in this binary


My id account:zsc_jDybJGbK

adam please check maybe your phone needs to enter freeze code.

Also, if you still have questions, please create your own request

...