0 votes
buenas e intentando 2 veces realizar el mismo proceso de read code via server corre casi todo el proceso y da error no encuentra servidor ya me consumio 5 creditos en cada intento (10 ¡creditos en total y sigo con el cell bloqueado) y los creditos consumidos adjunto los log de las operaciones, necesito recuerar esos creditos todo mi proceder fue correcto, espero su respuesta

 

  UNLOCK INSTRUCCIONES:
    Unlocking with original MSL code:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
  1. Phone must be powered on.
  2. Run dialer and type *#0*# (service mode will appear).
  3. Connect the phone to UART cable, choose correct COM port in port settings.
  4. Press 'Unlock' button.
  5. Paste MSL code in new opened window and press 'OK'.
 
    Unlocking TMB using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
    
    Unlocking SPR using sever:
  1. Insert not SPR card to the phone and power it on.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock...' button,  select 'Unlock SPR via Server',    
     write your login and password in window if it will appear.  
    (Login and password will be saved as default after first input and can be changed in settings.)
 
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM152 SAMSUNG Mobile USB Serial Port
Software version: 39.0

Checking Login and Password... Listo
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue?  Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-N950U
Android version: 9
PDA version: N950USQS6DSI3
CSC version: N950UOYN6DSI3
Versión del telefono: N950USQS6DSI3
Código del Producto: SM-N950UZKAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38JA0ARHQE
IMEI: 358502083087182
HW version: REV1.0
RF cal date: 2017.10.18
Chip name: MSM8998
Módem: MSM8998
Security patch: 2019-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait... Listo
Lectura de datos desde el teléfono ... Listo
Searching Samsung diag port... detectado COM152
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM305 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... error
 could not connect to server

Done with Samsung Tool PRO v.39.0

 

 

  UNLOCK INSTRUCCIONES:
    Unlocking with original MSL code:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
  1. Phone must be powered on.
  2. Run dialer and type *#0*# (service mode will appear).
  3. Connect the phone to UART cable, choose correct COM port in port settings.
  4. Press 'Unlock' button.
  5. Paste MSL code in new opened window and press 'OK'.
 
    Unlocking TMB using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
    
    Unlocking SPR using sever:
  1. Insert not SPR card to the phone and power it on.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock...' button,  select 'Unlock SPR via Server',    
     write your login and password in window if it will appear.  
    (Login and password will be saved as default after first input and can be changed in settings.)
 
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM152 SAMSUNG Mobile USB Serial Port
Software version: 39.0

Checking Login and Password... Listo
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits.Continue?  Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-N950U
Android version: 9
PDA version: N950USQS6DSI3
CSC version: N950UOYN6DSI3
Versión del telefono: N950USQS6DSI3
Código del Producto: SM-N950UZKAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38JA0ARHQE
IMEI: 358502083087182
HW version: REV1.0
RF cal date: 2017.10.18
Chip name: MSM8998
Módem: MSM8998
Security patch: 2019-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... Listo
Running zTool, please wait... Listo
Lectura de datos desde el teléfono ... Listo
Searching Samsung diag port... detectado COM152
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM305 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... error
 could not connect to server

Done with Samsung Tool PRO v.39.0
adjunto los 2 logs


UNLOCK INSTRUCCIONES:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM152 SAMSUNG Mobile USB Serial Port
Software version: 39.0

Checking Login and Password... Listo
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-N950U
Android version: 9
PDA version: N950USQS6DSI3
CSC version: N950UOYN6DSI3
Versión del telefono: N950USQS6DSI3
Código del Producto: SM-N950UZKAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38JA0ARHQE
IMEI: 358502083087182
HW version: REV1.0
RF cal date: 2017.10.18
Chip name: MSM8998
Módem: MSM8998
Security patch: 2019-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait... Listo
Lectura de datos desde el teléfono ... Listo
Searching Samsung diag port... detectado COM152
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM305 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... error
could not connect to server

Done with Samsung Tool PRO v.39.0





UNLOCK INSTRUCCIONES:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM152 SAMSUNG Mobile USB Serial Port
Software version: 39.0

Checking Login and Password... Listo
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-N950U
Android version: 9
PDA version: N950USQS6DSI3
CSC version: N950UOYN6DSI3
Versión del telefono: N950USQS6DSI3
Código del Producto: SM-N950UZKAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38JA0ARHQE
IMEI: 358502083087182
HW version: REV1.0
RF cal date: 2017.10.18
Chip name: MSM8998
Módem: MSM8998
Security patch: 2019-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... Listo
Running zTool, please wait... Listo
Lectura de datos desde el teléfono ... Listo
Searching Samsung diag port... detectado COM152
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM305 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... error
could not connect to server

Done with Samsung Tool PRO v.39.0
in Samsung Tool by (300 points)
edited by

1 Answer

0 votes
Hello, please try these codes

Freeze code: 40405941
NET lock:  79527251
by (102k points)
about that you answer me it is no longer useful to me the client left and I do work in another place, I no longer have the cell I need you credits back at the end it was not my mistake faith a problem of the Z3X server
refunded
Thank you very much, for the quick response, excellent support service
...