0 votes
SOLICITO REEMBOLSO HIZE LA ACTIVACION Y NO SE LIBERO Y ME CONSUMIO LOS CREDITOS.. AYUDA PORFAVOR
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock
Selected model: SM-G955U
Selected port: COM167 SAMSUNG Mobile USB Serial Port
Software version: 41.10

Checking Login and Password... OK
Ballance: 42 crd.
You have 42 credit(s) left. This operation takes 6 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G955U
Android version: 9
PDA version: G955USQS8DTI5
CSC version: G955UOYN8DTI5
Phone version: G955USQS8DTI5
Product code: SM-G955UZSATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: R28J53JKTGM
IMEI: 357758081592182
HW version: REV1.0
RF cal date: 2020.01.08
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: ABSENT
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM167
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM147 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 1...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 2...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 3...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 4...
Retry 5...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 6...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 7...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 8...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 9...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)
Retry 10...
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (4.12.0)

Done with Samsung Tool PRO v.41.10
in Samsung Tool by (140 points)

1 Answer

0 votes
Hello, refunded
by (102k points)
...