0 votes
samsung sm-g955u network lock phone ask for code and i read code  with z3x credit after that i enter the code to the phone it say success but it ask again the phone is customer phone they took it but i have video on it and opertion how it coud be refund my credit.

 

  UNLOCK INSTRUCTIONS:
    Unlocking with original MSL code:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
  1. Phone must be powered on.
  2. Type *#0808# and select 'DM+ACM+ADB'.
  3. Run dialer and type *#0*# (service mode will appear).
  4. Connect the phone to USB cable, choose correct COM port in port settings.
  5. Press 'Unlock' button.
  6. Paste MSL code in new opened window and press 'OK'.
  
    Unlocking TMB using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)
    
    Unlocking SPR using sever:
  1. Insert not SPR card to the phone and power it on.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock...' button,  select 'Unlock SPR via Server',    
     write your login and password in window if it will appear.  
    (Login and password will be saved as default after first input and can be changed in settings.)
  
    Reading codes using sever:
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
     to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G955U
Software version: 43.19

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue?  Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G955U
Android version: 9
PDA version: G955USQS8DTJ2
CSC version: G955UOYN8DTJ2
Phone version: G955USQS8DTJ2
Product code: SM-G955UZVAXAA
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: R28J70DCQGF
IMEI: 357759082237603
HW version: REV1.0
RF cal date: 2017.07.06
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-10-01
Boot Warranty bit: 0
SIM State: ABSENT
This phone may be locked to TMB and may not unlock via codes Continue?  Yes
Searching Samsung diag port... detected COM17
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM26 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 31490697
NET lock: 84292705
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.43.19
in General questions by (200 points)

1 Answer

0 votes

Hello. 

This phone may be locked to TMB and may not unlock via codes Continue?  Yes

by (201k points)
but it ask sim lock code i have a video how it will ber refund my 5 credit

Yes and software warn you that phone may not accept codes and you agree with this.

- Continue? 

- Yes

But the phone ask me sim network code so what about my refund no or yes
Ok, please provide please videoproof.
Ok, we refunded for this time. Next time be more carefull. You need to svitch csc to tmob and after this unlock as tmobile. Reflash phone to t-mobile firmware and then use direct unlock tmob.
Thank you for ur refund and advice
...